Light Weight Steel formwork Introduction Table Light steel formwork is an alkali-resistant formwork for building construction. It is made from a combination of various profiles formed by cold rolling of alkali-resistant ferritic stainless steel sheet with properties equivalent to Q355 and is made into various specifications by laser welding. It has the advantages of light weight, high strength,good bearing capacity, no release agent, easy cleaning, convenient disassembly, fast construction speed, etc., and will be widely used in construction engineering, bridge engineering,tunnel engineering and other fields.
WALL & COLUMNWALL PANEL
REMARKS: 1. Without external corner at both sides. 2. Without Rocker at the bottom.
DESCRIPTION: Wall Panel is used to support vertical structure like wall and column. Usually the bottom part is linked to Rockers with Bolt & Nut for easy dismantling while the top is connected to Beam Joint for beam or Slab Joint with Pin & Wedge.
| Item W (W*H ) m mm | weight (kg) |
| 600*2400 | 27.91 |
| 500*2400 | 24.04 |
| 400*240 | 20.32 |
| 350*2400 | 17.93 |
| 300*2400 | 14.89 |
| 250*2400 | 13.13 |
| 200*2400 | 11.44 |
| 150*240 | 9.35 |
| 125*2400 | 8.56 |
| 100*2400 | 7.76 |
| 50*2400 | 6.18 |
Table Lightweight Steel Formwork System and Al Alloy Formwork System compatible, interchangeable and mixed use. 2. The construction and fittings are identical. Table is committed to the research, development and test of Table lightweight steel formwork, and has finally produced a complete system that is more practical and lower in cost than aluminum formwork
