TABLE TB100‑Series Wall Formwork System: Next‑Gen High‑Strength Steel‑Framed Formwork Solution
Introduction
In concrete construction projects, the industry has long‑standing pain points: low reusability of timber formwork, excessive dead‑weight of conventional steel formwork, thermal deformation of plastic formwork, and high upfront investment for full aluminium formwork.
With over 20‑year expertise in formwork & scaffold R&D and manufacturing, TABLE Intelligent Construction Technology has developed the brand‑new TB100 Series Wall Formwork System. This innovative steel‑framed formwork adopts Q700/Q550 high‑strength alloy steel as frame material. It balances lightweight performance, heavy‑duty loading capacity and multi‑system compatibility, delivering a cost‑effective alternative for wall, column and slab concrete forming.
What Makes TABLE TB100 Series Stand Out
1.Premium High‑Strength Alloy Steel Frame
The formwork frame is fabricated from Q700 / Q550 high‑strength alloy steel. Compared with ordinary steel panels, it achieves high load‑bearing capacity with thinner material thickness, realizing lightweight performance comparable to aluminium and plastic formwork of equal load rating.
2.Full‑Frame Electrophoresis Anti‑Rust Treatment
Complete electrophoresis coating for the whole steel frame. Superior rust‑proof performance extends service life, lowers maintenance cost for formwork rental fleets.
3.Embedded 10 mm Plywood / Composite Face Board
10 mm plywood or composite board is inset into steel frames. Replaceable face panels allow quick on‑site swap when worn, maximising frame re‑circulation value.
4.100‑to‑65 Conversion Module (Straight & 90° Corner Transition)
The core innovation of TABLE TB100 system: dedicated conversion adapters enable seamless transition between TB100 panels and 65‑series aluminium / steel formwork, including straight‑line connection and 90‑degree corner connection. Contractors can mix‑match existing 65‑series aluminium formwork on‑site for complex building layouts.
5.Backward Compatibility with Existing Market Formwork
TB100 retains standard dimensions and assembling logic of mainstream 100‑type wall formwork. It can be intermixed with widely‑used plastic formwork (e.g. UO‑type formwork). Most existing accessories on‑site are still reusable, no need for full‑set new procurement.
6.Integrated Tie‑holes & Waler Positions
Built‑in tie holes and waler seating slots on panels. No extra field drilling required; accelerate erection speed for wall, column and slab pouring works.
7.Multi‑application Scenarios
One set of system covers wall formwork, column formwork and slab formwork. Suited for residential buildings, commercial complexes, infrastructure and other cast‑in‑situ concrete projects.
Main Component Overview
- Wall Panels: Core forming panels, multiple standard sizes from 150 mm up to 1350 mm height; wide weight range from 0.9 kg to 34 kg for flexible site selection.
- Transition Panels (Trans‑Panels): T‑P series adapters for 100‑65 conversion.
- Internal & External Corner Inserts (IC / OC): Standard inner‑corner and outer‑corner components for right‑angle wall & column forming.
- Hardware Accessories: Steel connecting handles, bolts & nuts, straight waler bolts. Upgraded durable steel hardware for repeated heavy‑cycle site usage.
All components are engineered by TABLE, with complete dimension specifications and weight parameters for rental company stock management and construction budget calculation.
FAQ
Q1: Can TB100 steel‑frame panels work together with my existing aluminium 65‑series formwork?
A: Yes. TABLE specially designs Trans‑Panels and Trans‑IC conversion pieces. Both straight joint and 90‑degree corner conversion are supported. You can combine TB100 panels with your 65‑series aluminium or steel formwork for hybrid forming without modifying other existing parts.
Q2: Is TB100 compatible with the old plastic 100‑series formwork already on my project?
A: Yes. The panel outer dimensions, hole layout and assembly method follow mainstream industry 100‑series standards. TB100 can be mixed‑used with popular UO‑type plastic formwork; most of your existing clamps, handles and tie accessories can keep in service. It protects your original formwork asset investment.
Q3: How about the service life compared to traditional steel and plastic formwork?
A: The frame uses Q700 high‑strength steel plus full electrophoresis anti‑corrosion finish. Steel frame enjoys long cyclic service life. The surface plywood / composite board is replaceable. In comparison to plastic panels prone to ageing and creep under concrete pressure, TB100 delivers far better durability for rental turnover business. Its weight is close to aluminium panels, while procurement cost is more competitive.
Q4: What construction applications can TABLE TB100 Series be used for?
A: TB100 is a multi‑purpose forming system. It is applicable for cast‑in‑situ concrete walls, structural columns and floor slabs. It fits high‑rise residential buildings, commercial buildings, public infrastructure projects.
Q5: Do TABLE supply full sets including panels, corners and all connection hardware?
A: Absolutely. TABLE provides one‑stop supply: wall panels, transition conversion parts, inner & outer corners, connecting handles, waler bolts and other hardware accessories. Complete component lists and weight datasheets are offered for your technical tendering and inventory management. Custom sizes can be discussed for special project requirements.
Why Choose TABLE
TABLE Intelligent Construction Technology (Suzhou) Co., Ltd. is a professional manufacturer focusing on formwork and shoring solutions.
- 20+ years industry accumulation in formwork & scaffold design and production
- Self‑developed TB100 patented wall formwork system
- Strict quality control for high‑strength steel raw material, welding and electrophoresis surface treatment
- Complete technical datasheets, BOM lists, weight tables for engineering bidding
- Global sales & technical support, professional solution consultancy for contractors and formwork rental enterprises
Contact Information
TABLE Intelligent Construction Technology (Suzhou) Co., Ltd.
Address: Unit 507,C‑7(Ouri building),No.328 Xinghu Street,Suzhou Industrial Park,China (Jiangsu) Pilot Free Trade Zone
Email: tableshoring@gmail.com
Website:www.tableformwork.com
Closing
For formwork rental firms and building contractors seeking lightweight, long‑life, multi‑compatible concrete forming solution, **TABLE TB100 series wall formwork system** offers a practical middle ground between timber, plastic, heavy steel and full aluminium formwork. Reach out to TABLE team for your project‑specific quotation and technical proposal.
